HP printer, not printing could be something really frustrating, these kinds of problems not only hamper your daily productivity but are also very time consuming as they delay a lot of unfinished work. Well! However, these types of problems are not very uncommon and can happen to any HP consumer, the reasons may be, among others, the following:
-
Defective or outdated drivers or software
-
The printer is not connected properly
-
Problems with the wired or wireless network
-
Bad USB connections
-
Paper jam
-
No ink or toner problems, etc.
The problems listed above are quite common and can be solved easily; However, if the user is a hobbyist, the user can solve or fix the “why my hp printer not printing” problems quite easily by following the instructions listed below.
How to fix the HP printer not printing problem:
Fixing these kinds of problems is not rocket science and with basic troubleshooting steps one could easily fix the HP printer, not the printing issue, however, you need to follow the steps mentioned below quite religiously so that everything is solved.
Check printer connectivity
First things first, check the status of the printer, see if it has been properly connected to the computer.
Check the printer lights, whether they are solid or not.
Check the network cable, see if it has been connected in a proper way.
Restart both the computer and the HP printer, sometimes simply restarting the problem solve.
Reinstall or update the printer drivers
-
Sometimes the printer stops printing due to faulty or outdated drivers, if you try to update or reinstall it, the problem can be resolved instantly.
-
You can update the HP printer driver automatically or you can just go to the home page at 123 hp com/setup
-
Now type in the model number of the HP printer, select from the list of drivers available to download and install.
-
Click continue to start the download process.
-
You should answer a few questions while installing.
-
When finished, click complete and then go to the home page to register and activate.
-
Either way, your existing driver would be updated or reinstalled and the HP printer not printing issue would certainly be solved.
Cancel all pending print jobs
To fix the no-print problem, you must first cancel all pending or queued print jobs.
To do that, you need to go to the Devices and Printer section from the Control Panel
Then right-click on HP Printer and check to see what is the print option
After this, go to the Printer menu and select open as administrator
Then click Cancel all documents
Now click confirm
All print jobs have been canceled, you can check again to see if the printer is working properly or not.
Set the printer as the default
Sometimes the problem of the printer, not printing can arise if the printer has not been put into the default mode, because when a print command is given to Windows, it directly sends the job to the default printer, so if the printer is in default mode, so half the worry is over.
To put it in default mode, you need to go to Control Panel and select Devices and Printers.
Next, locate your HP printer in the list of printing devices.
Now right click on the printer and from the drop-down menu select "Set as default"
You will see a check box with a checkmark, indicating that the printer has now been set as the default.
Give a print command to check if it is working fine.
Conclusion
I hope this blog was helpful enough to provide guidance regarding the hp printer not printing anything issue, in case the problem persists or you are still unable to perform the steps mentioned, feel free to call us at the number and our subject is capable. subject matter experts will help you instantly. Our team of highly experienced and dedicated is available 24/7 to assist you with any of your printer-related issues. So just pick up your phone and give us a call now and leave all your worries related to your HP printer behind.